7600-SIP-400 (USED) (USED) Specification
7600-SIP-400 Specification |
||||
Compatibility | Cisco Route Switch Processor 720 3C/3CXL, Cisco Supervisor Engine 720-3B/3BXL, and Cisco Supervisor Engine 32 (Sup-32) systems | |||
Minimum softwareCompatibility | Cisco IOSB. Software Release 12.2(18)SXE, or later releases for Supervisor Engine 720-3B/3BXL and Supervisor Engine 32 systems in native mode Cisco IOS Software; also, 12.2(33)SRB or later releases for RSP720-GE-3CXL and RSP720-GE-3C systems | |||
Protocols | b TCP
b User Datagram Protocol (UDP) b IPv4 Unicast and Multicast b IPv6 Unicast and Multicast b Multiprotocol Label Switching (MPLS) b SAToP and CESoPSN |
|||
Encapsulation | b Frame Relay
b Point-to-Point Protocol (PPP) b High-Level Data Link Control (HDLC) b ATM permanent virtual circuit-constant bit rate (PVC-CBR), variable bit rate real-time (VBR-rt), VBR non-real-time (VBR-nrt), and unspecified bit rate (UBR) b ATM switched virtual circuit (SVC)-CBR, VBR-rt, VBR-nrt, UBR, UBR+ b TDM over MPLS, ATM over MPLS, and ATM over GRE b L2TPv3 |
|||
Cards, ports, and slots | Four SPA bays per Cisco 7600 SIP-400 | |||
Features | QoS, ACLs, and Low-Speed Aggregation Features
QoS b Modular QoS CLI (MQC) b Classification based on: b& IP Precedence (IPv6 and IPv4) b& Diffserv code point (DSCP) (IPv6 and IPv4) b& MPLS experimental values (MPLS EXP) b& Extended ACL b& ATM CLP b& Frame Relay DE b& Class of Service (CoS) b& VLAN Congestion Avoidance b Weighted Random Early Detection (WRED) based on IP Precedence, DSCP, MPLS EXP, ECN (mark IP TOS field for POS traffic) Queuing b Congestion management b& Per-virtual circuit queuing b& Ingress and egress Low-Latency Queuing (LLQ) b& Egress Class-Based Weighted Fair Queuing (CBWFQ) Traffic Classification, Shaping, and Bandwidth Policing b Marking b Policing b Distributed traffic shaping (DTS) b Hierarchical service policies Security b Standard and extended ACLs Layer 2 and Layer 3 VPNs b Ethernet over MPLS (EoMPLS) b ATM over MPLS (ATM over MPLS) b& ATM Adaptation Layer 5 (AAL5) virtual circuit mode, single and packed cell relay virtual circuit mode b Frame Relay over MPLS (FRoMPLS) b Layer 3 MPLS/VPN over GRE b ATM over GRE, Ethernet over GRE b TDM over MPLS High availability b IPv4 Nonstop Forwarding (NSF) b IPv4 Stateful Switchover (SSO) b Automatic Protection Switching (APS) with ATM, POS SPAs b OIR for both SIP and SPA Multilink support b Frame Relay Multilink^1 (1) Added in >15.2(04)S |
|||
Memory | 1 GB default Double Data Rate (DDR) synchronous dynamic RAM (SDRAM) per Cisco 7600 SIP-400 | |||
Supported SPAs | Following SPAs are supported on SIP-400 release wise
7600-SIP-400 – POS SPAs Support |
|||
SPA ID | Project/Family | Height | Min Release | |
SPA-2XOC3-POS | Sphinx | Half | 12.2(18)SXE | |
SPA-4XOC3-POS | Sphinx | Half | 12.2(18)SXE | |
SPA-1XOC12-POS | Sphinx | Half | 12.2(18)SXE | |
SPA-1XOC48-POS | Iguana | Half | 12.2(33)SRA | |
SPA-4XOC3-POS-V2 | Gladiator | Half | 15.2(04)S | |
SPA-8XOC3-POS | Gladiator | Half | 15.2(04)S | |
SPA-2XOC12-POS | Gladiator | Half | 15.2(04)S | |
SPA-4XOC12-POS | Gladiator | Half | 15.2(04)S | |
7600-SIP-400 – ATM SPAs Support | ||||
SPA ID | Project/Family | Height | Min Release | |
SPA-2XOC3-ATM | Warlord | Full | 12.2(18)SXE | |
SPA-4XOC3-ATM | Warlord | Full | 12.2(18)SXE | |
SPA-1XOC12-ATM | Warlord | Full | 12.2(18)SXE | |
SPA-1XOC48-ATM | Ronin | Full | 12.2(33)SRA | |
SPA-3XOC3-ATM-V2 | Barbarian | Half | 15.0(01) | |
SPA-1XOC3-ATM-V2 | Barbarian | Half | 15.0(01) | |
SPA-1XOC12-ATM-V2 | Barbarian | Half | 15.0(01) | |
7600-SIP-400 – GE SPAs Support | ||||
SPA ID | Project/Family | Height | Min Release | |
SPA-2X1GE | Wanda | Half | 12.2(18)SXF | |
SPA-2X1GE-V2 | Wanda | Half | 12.2(18)SRB | |
SPA-5X1GE-V2 | Cricket | Half | 12.2(33)SRB | |
SPA-1X10GE-V2 | Scorpion | Half | 12.2(33)SRB | |
SPA-2X1GE-SYNCE | SyncE | Half | 15.0(01) | |
SPA-4X1FE-TX-V2 | FastEthernet | Half | 12.2(33)SRD | |
SPA-8X1FE-TX-V2 | FastEthernet | Half | 12.2(33)SRD | |
7600-SIP-400 – CEoP SPAs Support | ||||
SPA ID | Project/Family | Height | Min Release | |
SPA-24XT1E1-CE | Velvet Hammer | Half | 12.2(33)SRB | |
SPA-1XOC3-CE | Black Russian | Half | 12.2(33)SRB | |
SPA-2XT3E3-CE | White Russian | Half | 12.2(33)SRC(ATM only) | |
7600-SIP-400 – Serial/Channelized SPAs | ||||
SPA ID | Project/Family | Height | Min Release | |
SPA-2XT3E3 | Javelin | Half | 12.2(33)SRC | |
SPA-4XT3E3 | Javelin | Half | 12.2(33)SRC | |
SPA-8XCHTE1 | Maverick | Half | 12.2(33)SRC | |
SPA-CHOC3-STM1 | Prowler | Half | 12.2(33)SRC | |
SPA-2XCT3 | Patriot | Half | 12.2(33)SRC | |
SPA-4XCT3 | Patriot | Half | 12.2(33)SRC | |
SPA-4XT-SERIAL | DocOct | Half | 15.2(03)S | |
SPA-CHOC12-STM4 | Chopper | Half | 12.2(33)SRD | |
SPA-1XCHOC48/DS3 | Trex | Full | 15.2(01)S | |
SPA-2XT3/E3-V2 | Javelin-V2 | Half | 15.3(3)S | |
SPA-4XT3/E3-V2 | Javelin-V2 | Half | 15.3(3)S | |
SPA-8XCHT1/E1-V2 | Maverick-V2 | Half | 15.3(3)S | |
SPA-1XCHSTM1/OC3-V2 | Prowler-V2 | Half | 15.3(3)S | |
SPA-2XCT3/DS0-V2 | Patriot-V2 | Half | 15.3(3)S | |
SPA-4XCT3/DS0-V2 | Patriot-V2 | Half | 15.3(3)S | |
Environmentalconditions | b Operating temperature: 32 to 104B0F (0 to 40B0C)
b Storage temperature: -40 to 167B0F (-40 to 75B0C) b Relative humidity: 10 to 90 percent, noncondensing b Operating altitude: -60 to 2000m |
|||
MIBs | b Cisco Entity MIB (CISCO-ENTITY-MIB)
b Cisco Entity Asset MIB b Cisco Entity Field-Replaceable Unit (FRU) Control MIB b Cisco Entity Alarm MIB b Interface IF MIB (RFC 2233) b Frame Relay MIB (RFC 1315) b Cisco Frame Relay MIB b ATM MIB (RFC 1695) b Definitions of Managed Objects for Bridges (RFC 1493) b Evolution of Interfaces Group of MIB-II (RFC 1573) b SNMP MIB II (RFC 1213) b Remote Monitoring (RMON) MIB (RFC 1757) b Switch Monitoring (SMON) MIB |
|||
Network management | Supported with CiscoWorks CiscoView
CiscoWorks Resource Manager Essentials (RME) Cisco IP Solution Center (ISC) |
|||
Physical specifications | b Occupies one slot in a Cisco 7600 Series router
b Supports up to 12 Cisco 7600 SIP-400s in a 13-slot chassis b Requires Supervisor Engine 720-3B or 720-3BXL b Dimensions (H x W x D): 1.75 x 15.375 x 16 in. b Weight: 16 lbs not including the packaging |
|||
Power | 185W power consumption per Cisco 7600 SIP-400
265W maximum power consumption with 4 SPAs |
|||
Indicators | Cisco 7600 SIP-400 status: green (operational); orange (faulty) | |||
Regulatory complianceSafety | CE marking
b UL 60950 b CSA C22.2 No. 60950 b EN60950 b TS001 b IEC 60950 b AS/NZS3260 b UL60950 EMC b FCC Part 15 Class A b ICES-003 Class A b VCCI Class A b EN55022 Class A b CISPR22 Class A b AS/NZS3548 Class A b EN61000-3-2 b EN61000-3-3 b EN61000-3-1 b EN55024 b EN50082-1 b EN300 386 |
|||
Standards | Telecommunications
b TU-T G.610 b ITU-T G.703 b ITU-T G.707 b ITU-T G.783 Sections 9-10 b ITU-T G.784 b ITU-T G.803 b ITU-T G.813 b ITU-T G.825 b ITU-T G.826 b ITU-T G.841 b ITU-T G.957 Table 3 b ITU-T G.958 b ITU-T I.361 b ITU-T I.363 b ITU I.432 b ITU-T Q.2110 b ITU-T Q.2130 b ITU-T Q.2140 b ITU-T Q.2931 b ITU-T O.151 b ITU-T O.171 b ETSI ETS 300 417-1-1 b ACA TS 026 (1997) b BABT/TC/139 (Draft 1e) |