WS-C2960XR-48TD-I Specification |
|
| Enclosure type | Rack-mountable – 1U |
| Ports | 48 x 10/100/1000 + 2 x 10 Gigabit SFP+ |
| Network management Interface | 10/100 Mbps Ethernet (RJ-45) |
| Available PoE Power | None |
| Forwarding bandwidth(Gbps) | 108Gbps |
| Maximum stacking number | 8 |
| Stack Bandwidth | 80G |
| Forwarding Performance | 130.9Mpps |
| Switching bandwidth | 216Gbps |
| Maximum active VLANs | 1023 |
| MAC Address Table Size | 16K (default) |
| CPU | APM86392 600MHz dual core |
| RAM | 512 MB |
| Flash Memory | 128 MB |
| Status Indicators | ● Per-port status: Link integrity, disabled, activity, speed, and full duplex ● System status: System, RPS, Stack link status, link duplex, and link speed |
| Expansion / Connectivity | |
| Console ports | USB (Type-B), Ethernet (RJ-45) |
| Expansion Slot(s) | 1 FlexStack-Plus slot and 1 power redundant slot |
| Stack Modules | C2960X-STACK |
| Stacking cable | ● CAB-STK-E-0.5M FlexStack-Plus stacking cable with a 0.5 m length ● CAB-STK-E-1M FlexStack-Plus stacking cable with a 1.0 m length ● CAB-STK-E-3M FlexStack-Plus stacking cable with a 3.0 m length |
| Power supply | PWR-C2-250WAC |
| Power Device | Power supply – redundant – plug-in module |
| Power Redundancy | optional |
| Voltage range (Auto) | 110V-240V |
| Power Consumption Operational | 0.047kVA |
| Miscellaneous | |
| Width | 17.5 Inches (44.5 cm) |
| Depth | 16 Inches (40.8 cm) |
| Height | 1.75 Inches (4.45 cm) |
| Weight | 13.3 Pounds (6.1Kg) |
| Package Weight | 35.6 Pounds (16.15 Kg) |
| Rack Mounting Kit | Optional |
| MTBF in hours | 440,880 |
| Compliant Standards | ● IEEE 802.1D Spanning Tree Protocol ● IEEE 802.1p CoS Prioritization ● IEEE 802.1Q VLAN ● IEEE 802.1s ● IEEE 802.1w ● IEEE 802.1X ● IEEE 802.1ab (LLDP) ● IEEE 802.3ad ● IEEE 802.3af and IEEE 802.3at ● IEEE 802.3ah (100BASE-X single/multimode fiber only) ● IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports ● IEEE 802.3 10BASE-T ● IEEE 802.3u 100BASE-TX ● IEEE 802.3ab 1000BASE-T ● IEEE 802.3z 1000BASE-X ● RMON I and II standards ● SNMP v1, v2c, and v3 ● IEEE 802.3az ● IEEE 802.3ae 10Gigabit Ethernet ● IEEE 802.1ax |
| System software / license | |
| System software | IOS IP Lite |
| license | ENERGY-MGMT, ENERGY-MGT-100-K9 |
| features | ● IP unicast routing protocols (Static, Routing Information Protocol Version 1 [RIPv1], RIPv2, RIPng, and EIGRP-Stub) ● Advanced IP unicast routing protocols (OSPF for Routed Access) ● EIGRPv3-Stub and PIMv6-Stub are supported as a part of the IPv6 routing suite. ● Equal-cost routing ● Policy-based routing (PBR) ● Hot Standby Routing Protocol (HSRP) and Virtual Router Redundancy Protocol (VRRP) ● Protocol Independent Multicast (PIM) |
| Network security | ● MAC-based VLAN assignment enables ● Cisco TrustSec uses ● Comprehensive 802.1X ● IPv6 First-Hop Security ● Device Sensor and Device Classifier ● Cisco Trust Anchor Technology ● Cisco Threat Defense ● Private VLANs ● Unicast Reverse Path Forwarding (uRPF) ● Multidomain Authentication ● Access Control Lists (ACLs) ● Switched Port Analyzer (SPAN) ● Secure Shell (SSH) Protocol, Kerberos, and Simple Network Management Protocol Version 3 (SNMPv3) ● TACACS+ and RADIUS authentication ● MAC Address Notification ● Multilevel security on console access BPDU Guard ● Spanning Tree Root Guard (STRG) ● IGMP filtering |
| Management & Troubleshooting | ● Auto-MDOX ●TDR ● UDLD ● IP SLA Responder
● layer 2 / IP Traceroute ● SPAN ● RSPAN ● Express Setup ● Device Manager ● Cisco Network Assistant ● Smartports + Advisor ● Troubleshooting Advisor ● Drag-and-drop Cisco IOS Upgrade ● IP Address DHCP ● Autoinstall with saved configuration ● Configuration Replace ● DHCP Auto Image Upgrade ● DHCP Port Based Allocation ● Error Disable MIB |
| Technical Support and Services | ● Cisco SMARTnet Service ● Cisco Smart Foundation Service ● Cisco Smart Care Service
● Cisco SP Base Service ● Cisco Focused Technical Support Services |
| Environmental Ranges | |
| Operating temperature up to 5000 ft (1500 m) | 23ºF to 113º (-5ºC to 45ºC) |
| Operating temperature up to 10,000 ft (3000 m) | 23ºF to 104ºF (-5ºC to 40ºC) |
| Short-term exception at sea level* | 23ºF to 131ºF (-5ºC to 55ºC) |
| Short-term exception up to 5000 feet (1500 m)* | 23ºF to 122ºF (-5ºC to 50ºC) |
| Short-term exception up to 10,000 feet (3000 m)* | 23ºF to 113ºF (-5ºC to 45ºC) |
| Short-term exception up to 13,000 feet (4000 m)* | 23º to 104ºF (-5ºC to 40ºC) |
| Storage temperature up to 15,000 feet (4573 m) | -13º to 158ºF (-25º to 70ºC) |
| Operating altitude | Up to 10,000 (Up to 3000 Meters) |
| Storage altitude | Up to 13,000 (Up to 4000 Meters) |
| Operating relative humidity | 10% to 95% noncondensing |
| Storage relative humidity | 10% to 95% noncondensing |
Cisco Switch Catalyst 2960
Cisco Catalyst WS-C2960XR-48TD-I
| Model: | WS-C2960XR-48TD-I Catalyst 2960-XR Series Switche |
| Detail: | Catalyst 2960-XR 48 GigE, 2 x 10G SFP+, IP Lite |
| Brand: | CISCO |
| Condition: | Brand New Sealed |
| Availability: | IN STOCK |
$3,577.00
InquiryCompare| brands | Cisco |
|---|
Based on 0 reviews
Be the first to review “Cisco Catalyst WS-C2960XR-48TD-I”
Related products
-
-
-
Cisco Switch Catalyst 2960
Cisco Catalyst WS-C2960S-48TS-S
Model: WS-C2960S-48TS-S Catalyst 2960-S Series GE Switch Detail: Cisco Catalyst 2960S-48TS Layer 2 – 48 x 10/100/1000 Ports – Gigabit Ethernet Switch – 2 x SFP – LAN Lite – Managed Brand: CISCO Condition: Brand New Sealed Availability: IN STOCK SKU: WS-C2960S-48TS-S (USED) -
Cisco Switch Catalyst 2960
Cisco Catalyst WS-C2960L-24PS-LL
Model: WS-C2960L-24PS-LL Catalyst 2960-L Switch Detail: Catalyst 2960L 24 port GigE with PoE, 4 x 1G SFP, LAN Lite (Asia Pacific Part Number: WS-C2960L-24PS-AP) Brand: CISCO Condition: Brand New Sealed Availability: IN STOCK SKU: WS-C2960L-24PS-LL
There are no reviews yet.