| General |
| Device Type |
Switch – 96 ports – managed – with Cisco Catalyst 4500 Supervisor Engine 7L-E, 2x Cisco Line Cards (WS-X4648-RJ45V+E) |
| Enclosure Type |
Rack-mountable 11U |
| Subtype |
Gigabit Ethernet |
| Ports |
96 x 10/100/1000 (PoE) + 2 x Gigabit SFP + 2 x combo SFP/SFP+ |
| Power Over Ethernet (PoE) |
PoE+ |
| Performance |
Switching capacity: 520 Gbps ¦ Per-slot switching capacity: 48 Gbps ¦ IPv6 routing: 110 Mbps ¦ IPv4 routing: 225 Mbps |
| Capacity |
QoS hardware entries: 64000 ¦ Security services entries: 64000 ¦ Virtual interfaces (VLANs): 4094 ¦ IPv4 routes: 64000 ¦ IPv6 routes: 32000 ¦ Spanning Tree Protocol instances: 12000 ¦ Switched virtual interfaces (SVIs): 4094 ¦ NetFlow entries: 128000 ¦ ARP entries: 47000 |
| MAC Address Table Size |
55K entries |
| Jumbo Frame Support |
9216 bytes |
| Routing Protocol |
PIM-SSM |
| Remote Management Protocol |
RMON 1, RMON 2 |
| Features |
Flow control, modular design, layer 2 switching, power over Ethernet (PoE), IPv6 support, half duplex mode, full duplex mode, Spanning Tree Protocol (STP) support, Quality of Service (QoS), Jumbo Frames support, MLD snooping, PoE+, IPv4 support, Link Aggregation Control Protocol (LACP), NetFlow, universal power over Ethernet (UPOE) |
| Compliant Standards |
IEEE 802.3, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.3at, IEEE 802.3az |
| Processor |
1: 1.5 GHz |
| RAM |
2 GB SDRAM |
| Flash Memory |
1 GB |
| Status Indicators |
Port status, power, link OK, status of modules, link/activity |
| Expansion / Connectivity |
| Interfaces |
96 x 1000Base-T RJ-45 PoE ¦ 1 x 1000Base-T RJ-45 management ¦ 1 x console RJ-45 management ¦ 1 x USB Type A ¦ 2 x SFP ¦ 2 x SFP+ |
| Expansion Slots |
7 (total) / 4 (free) x expansion slot ¦ 1 (total) / 1 (free) x SD Memory Card |
| Installed Modules Qty (Max) |
3 (installed) / 7 (max) |
| Power |
| Power Device |
Internal power supply – hot-plug |
| Installed Qty |
0 (installed) / 2 (max) |
| Power Redundancy |
Optional |
| Power Redundancy Scheme |
1+1 (with optional power supply) |
| Miscellaneous |
| Rack Mounting Kit |
Included |
| MTBF |
248,630 hours |
| Compliant Standards |
NEBS level 3, FCC Class A certified, CISPR 22 Class A, EN 60950, EN 61000-3-2, EN55022, IEC 60950, EN 61000-3-3, EN55024, EN55022 Class A, UL 60950, EN50082-1, CSA 22.2 No. 60950, EN 61000-6-1, ACA TS001, AS/NZS 3260, FCC Part 68, AS/NZ 3548 Class A, JATE, ICES-003 Class A, CS-03, FCC CFR47 Part 15, VCCI Class A |
| Software / System Requirements |
| Software Included |
Cisco IOS LAN Base |
| Dimensions & Weight |
| Width |
17.3 in |
| Depth |
12.5 in |
| Height |
19.2 in |
| Manufacturer Warranty |
| Service & Support |
Limited warranty – advance hardware replacement – lifetime – response time: 10 days |
| Environmental Parameters |
| Min Operating Temperature |
32 °F |
| Max Operating Temperature |
104 °F |
| Humidity Range Operating |
10 – 90% (non-condensing) |
| Min Storage Temperature |
-40 °F |
| Max Storage Temperature |
167 °F |
There are no reviews yet.