SPA-8XOC3-POS specifications |
|
Description | Cisco ASR 9000 AdapterSPA-8XOC3-POS8-port OC-3/STM-1 POS Shared Port Adapters |
Product Name | Cisco 8-Port OC-3c/STM-1 POS SPA |
Product compatibility | • Cisco 12000 Series Routers
• Cisco XR 12000 Series Routers • Cisco ASR 1000 Series Router • Cisco ASR 9000 Series Router |
Port density per SPA | 8 ports |
Physical interface | • OC-3c/STM-1 SFP optics module • Visual status indicators (LEDs):
• SPA status LED • Per-port LEDs • Carrier and alarm • Active and loopback |
Protocols | • RFC 1662 PPP in High-Level Data Link Control (HDLC)-like framing
• RFC 2615 Point-to-Point Protocol (PPP) over SONET/SDH • RFC 2427, Multiprotocol Interconnect over Frame Relay • IPv4/IPv6 |
Features and functions | Synchronization
• Local (internal) or loop timed (recovered from network) • Pointer activity monitoring Local (diagnostic) and line (network) loopback Payload mapping • POS with 1 + X^43 self-synchronous scrambler SONET/SDH compliance • Telcordia (Bellcore) GR-253-CORE (as applicable) • ANSI T1.105, T1.231 • ITU-T G.707, G.957, G.825 (as applicable) Supported SONET/SDH alarm and signal events • Signal failure bit error rate (SF-ber) • Signal degrade bit error rate (SD-ber) • Signal label payload construction (C2) • Path trace byte (J1) • Section • Loss of signal (LoS) • Loss of frame (LoF) • Error counts for B1 • Threshold crossing alarms (TCA) for B1 • Line • Line alarm indication signal (LAIS) • Line remote defect indication (LRDI) • Line remote error indication (LREI) • Error counts for B2 • TCA for B2 • Path • Path alarm indication signal (PAIS) • Path remote defect indication (PRDI) • Path remote error indication (PREI) • Error counts for B3 • TCA for B3 • Loss of pointer (LoP) • Positive stuffing event (PSE) • Negative stuffing event (NSE) • Path unequipped indication signal (PUNEQ) • Path payload mismatch indication signal (PPLM) |
Network management | • RFC 2558 MIB (SONET/SDH)
• Simple Network Management Protocol (SNMP) |
Reliability and availability | • Online insertion and removal (OIR)
• Field-replaceable SFP optical modules • 1+1 SONET Automatic Protection Switching (APS) and SDH Linear Multiplexer Section Protection (MSP) protocols • Single SPA software reset |
Physical specifications |
• Weight: 0.75 lb (0.34 kg) • Height: 0.8 in. (2.03 cm) (single height) • Width: 6.75 in. (17.15 cm) • Depth: 7.28 in. (18.49 cm) |
Power | • 8-Port OC-3c/STM-1 = 8.0W (no optics) |
Environmental specifications | • Operating temperature: 41 to 104°F (5 to 40°C)
• Storage temperature: -38 to 150°F (-40 to 70°C) • Operating humidity: 5 to 85% relative humidity • Storage humidity: 5 to 95% relative humidity |
Compliance and agency approvals | Safety
• UL 60950 • CSA 22.2-No.60950 • EN60950 • IEC 60950 CB Scheme • ACA TS001 • AS/NZS 3260 • EN60825IEC60825 laser safety (SR, IR-Class 1) (VSR-Class 1M)1 • 21CFR1040 -FDA Code of Federal Regulations (USA) laser safety (SR, IR-Class 1) (VSR-Class 1M)1 EMC • FCC Part 15 (CFR 47) • ICES 003 • EN55022 • CISPR 22 • AS/NZS CISPR22 • VCCI • EN55024 • EN50082-1 • EN61000-6-1 • EN61000-3-2 • EN61000-3-3 Network Equipment Building System (NEBS) This product is designed to meet the following requirements (official qualification may be in progress): • SR-3580-NEBS: Criteria levels (Level 3 compliant) • GR-63-Core-NEBS: Physical protection • GR-1089-Core-NEBS: EMC and safety ETSI • EN300 386/EN300 386-2 Class B • ETS 300 019 Storage Class 1.1 • ETS 300 019 Transportation Class 2.3 • ETS 300 019 Stationary Use Class 3.1 |
Cisco Router ASR 9000
Cisco Router SPA-8XOC3-POS
Model: | SPA-8XOC3-POS Cisco ASR 9000 Series Shared Port Adapter |
Detail: | Cisco ASR 9000 Adapter SPA-8XOC3-POS 8-port OC-3/STM-1 POS Shared Port Adapters |
Brand: | CISCO |
Condition: | Brand New Sealed |
Availability: | IN STOCK |
$25,300.00
InquiryComparebrands | Cisco |
---|
There are no reviews yet.