A9K-MOD80-TR Specification
A9K-MOD80-TR Specifications |
|
| Type | ASR 9000 Mod80 Modular Line Card, Packet Transport Optimized, requires modular port adapters |
| Physical Dimensions | 14.5 W x 1.72 H x 22.40 L
14.5 W x 1.72 H x 24.25 L (including ejector levers) |
| Weight | 17.5 lbs. (est.) (7.93 Kg) |
| Chassis compatibility | Compatible with the Cisco ASR 9922, 9010, 9006 and 9001 systems |
| Port density | Up to 2 modular port adapters are supported per line card. |
| Ethernet | B7 IEEE 802.3 compliant
B7 10 Gigabit Ethernet PHY monitoring B7 IEEE 802.x flow control B7 Full-duplex operation B7 Per-port byte and packet counters for policy drops; oversubscription drops; cyclic redundancy check (CRC) error drops; packet sizes; and unicast, multicast, and broadcast packets |
| Card density | Maximum number of line cards per system: Cisco ASR 9922 = 20, Cisco ASR 9010 = 8, and Cisco ASR 9006 = 4 |
| Options | Each line card is available as either a Service Edge Optimized (enhanced QoS) or Packet Transport
Optimized (basic QoS) line card. |
| Reliability and availability | Line card online insertion and removal (OIR) support without system impact |
| Network Equipment Building Standards (NEBS) | Cisco ASR 9000 Series Routers are designed to meet:
B7 SR-3580: NEBS Criteria Levels (Level 3) B7 GR-1089-CORE: NEBS EMC and Safety B7 GR-63-CORE: NEBS Physical Protection |
| Operating temperature (nominal) | 41 to 104B:F (5 to 40B:C) |
| Operating temperature (short-term) | 23 to 131B:F (b5 to 55B:C) |
| Operating humidity (nominal) relative humidity | 10 to 85% |
| Storage temperature | b40 to 158B:F (b40 to 70B:C) |
| Storage relative humidity | 5 to 95%
Note: Not to exceed 0.024 kg of water per kg of dry air |
| Operating altitude | b60 to 4000m (up to 2000m conforms to IEC, EN, UL, and CSA 60950 requirements) |
| ETSI standards | Cisco ASR 9000 Series Routers are designed to meet:
B7 EN300 386: Telecommunications Network Equipment (EMC) B7 ETSI 300 019 Storage Class 1.1 B7 ETSI 300 019 Transportation Class 2.3 B7 ETSI 300 019 Stationary Use Class 3.1 B7 EN55022: Information Technology Equipment (Emissions) B7 EN55024: Information Technology Equipment (Immunity) B7 EN50082-1/EN-61000-6-1: Generic Immunity Standard |
| EMC standards | Cisco ASR 9000 Series Routers are designed to meet:
B7 FCC Class A B7 ICES 003 Class A B7 AS/NZS 3548 Class A B7 CISPR 22 (EN55022) Class A B7 VCCI Class A B7 BSMI Class A B7 IEC/EN 61000-3-2: Power Line Harmonics B7 IEC/EN 61000-3-3: Voltage Fluctuations and Flicker |
| Immunity | Cisco ASR 9000 Series Routers are designed to meet:
B7 IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8kV Contact, 15kV Air) B7 IEC/EN-61000-4-3: Radiated Immunity (10V/m) B7 IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2kV Power, 1kV Signal) B7 IEC/EN-61000-4-5: Surge AC Port (4kV CM, 2kV DM) B7 IEC/EN-61000-4-5: Signal Ports (1kV) B7 IEC/EN-61000-4-5: Surge DC Port (1kV) B7 IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10Vrms) B7 IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30A/m) B7 IEC/EN-61000-4-11: Voltage DIPS, Short Interruptions, and Voltage Variations |
| Safety | Cisco ASR 9000 Series Routers are designed to meet:
B7 UL/CSA/IEC/EN 60950-1 B7 IEC/EN 60825 Laser Safety B7 ACA TS001 B7 AS/NZS 60950 B7 FDA: Code of Federal Regulations Laser Safety |
