8 port channelized T1/E1 and PRI network module Cisco Router Network Module


Model: NM-8CE1T1-PRI Cisco Router Network Module
Detail: 8 port channelized T1/E1 and PRI network module Cisco Router Network Module

$4,421.00

InquiryCompare

NM-8CE1T1-PRI Specification

Product Nunber NM-8CE1T1-PRI
Product Description 8 Port Channelized T1/E1 and ISDN PRI Network Module
Diagnostic Loopback Support • E1 loopback modes:

• Controller local loopback

• Interface local loopback

• T1 loopback modes:

• Interface local loopback

• Interface remote loopback

• Controller local loopback

• Controller remote loopback

• CSU loopback modes for T1 CSU:

• Data terminal equipment (DTE) loopback

• Network loopback

• Payload loopback

Alarm Detection • Yellow Alarm-Receive/Send from/to network

• Blue Alarm-Receive alarm indication signal (AIS) from network

• Red Alarm-Loss of network signal

Relevant MIB Support • T1 MIB (RFC1406-MIB)

• Cisco Integrated DSU/CSU MIB (CISCO-ICSUDSU-MIB)

Remote Management • Cisco CNS 2100 Series Intelligence Engine (IE2100)

• CiscoWorks

Signaling Debugging • ISDN Q.921 and Q.931 decode

• All other previously existing applicable Cisco IOS Software debugs

Dimensions (H x W x D) 1.59 x 7.10 x 7.29 in. (4.0 x 18.0 x 18.5 cm)
Weight • HWIC-1CE1T1-PRI: 0.18 lb (0.08 kg)

• HWIC-2CE1T1-PRI: 0.19 lb (0.09 kg)

• NM-8CE1T1-PRI: 1.4 lb (0.63 kg)

Operating Temperature • 32 to 104°F (0 to 40°C)
Nonoperating Temperature • -40 to 158° F (-40 to 70°C)
Relative Humidity • 5-95% noncondensing
LEDs LEDs per port

• Carrier Detect/Loopback (CD/LP):

• Off = No carrier detect

• Green On = Carrier detect

• Yellow On = Port in loopback mode

• Alarm (AL):

• Off = No alarms

• Yellow On = Port in alarm mode

LEDs per module (on NM-8CE1T1-PRI only):

• EN:

• Off = Card not available

• On = Card enabled

Ports • 1, 2, or 8 T1/E1 ports on RJ-48C connectors
Line Bit Rate (per Port) • E1: (2.048 Mbps)

• T1: (1.544 Mbps)

Line Coding • E1: High-density bipolar three (HDB3)

• T1: Alternate mark inversion (AMI) and binary 8-zero substitution (B8ZS)

Framing Formats • E1: CRC4

• T1: Super Frame (SF) and Extended Super Frame (ESF)

Output Levels • E1: short-haul/long-haul

• T1 (line build-out [LBO]): 0, -7.5, or -15 dB

SKU: NM-8CE1T1-PRI Category:

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “8 port channelized T1/E1 and PRI network module Cisco Router Network Module”

There are no reviews yet.