ASR 1000 Route Processor 3

ASR1000-RP3 Specifications

(Please consult your Cisco account representative for additional details.)

●  Auxiliary port (RJ-45 connector)

●  10/100/1000 Ethernet port (RJ-45 connector)

●  RJ-48 connector for BITS input clock and output source

●  1-GB USB compact flash memory

●  Up to 1,000,000 IPv4 routes or 1,000,000 IPv6 routes

●  BGP RR scalability up to 8,000,000 IPv4 routes or 6,000,000 IPv6 routes

With 16-GB memory:

●  Up to 4,000,000 IPv4 routes or 4,000,000 IPv6 routes

●  BGP RR scalability up to 24,000,000 IPv4 routes or 17,000,000 IPv6 routes

●  Support for OIR

●  Support for NSF and SSO

●  Support for ISSU

●  Console port (through the CLI)

●  SNMP

●  RFC 2665

Green – All power rails are within specifications

●  STAT – Status

Green – Cisco IOS Software has booted

Yellow – BootROM has successfully loaded

Red – System failure or during boot process

●  ACTV- Active

Green – Active route processor

●  STBY – Standby

Yellow – Standby route processor

●  CRIT – Critical alarm

Red – Critical alarm or during boot process

●  MAJ – Major alarm

Red – Major alarm

●  MIN – Minor alarm

Amber – Minor alarm

●  HD – Internal HDD

FLASH Green – Activity indicator

Off – No activity

●  USB – External compact flash

FLASH green – Activity indicator

●  BF – Boot flash (Internal)

FLASH green – Activity indicator

Off – No activity

●  CARRIER

BITS I/F Mode

Off – Out of service or not configured

Green – Normal or bridging

Amber – Fast

●  DTI Mode

Off – Warm-up, free-run, or holdover

Green – In service or working properly

Amber – Fault or loop condition

●  LINK – Management Ethernet link status

Solid green – Link with no activity

FLASH green – Link with activity

Off – No link

●  DISK2 – Internal HDD

FLASH green – Activity indicator

Off – No activity

●  CARRIER – BITS interface

Off – Out of service

Green – In frame and in service

Amber – Fault or loop condition

(H x W x D)

●  UL60950-1 and CAN/CSA-C22.2 No. 60950-1-03 Information technology equipment

●  AS/NZS 60950-1

●  IEC/EN 60950-1 Information technology equipment

●  73/23/EEC

Electromagnetic Emissions Certification

●  CFR 47 Part 15: (FCC) Class A

●  ICES 003 Class A

●  AS/NZ CISPR 22: Class A

●  CISPR 22 (EN55022) Class A

●  VCCI Class A

●  KN22

●  IEC/EN 61000-3-2 (or 3-12 as applicable): AC Power Line Harmonics

●  IEC/EN 61000-3-3 (or 3-11 as applicable): AC Voltage Fluctuations and Flicker

Immunity

●  IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8-kV Contact, 15-kV Air)

●  IEC/EN-61000-4-3: Radiated Immunity (10 V/m)

●  IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2-kV Power, 1-kV Signal)

●  IEC/EN-61000-4-5: Surge AC Port (4-kV CM, 2-kV DM)

●  IEC/EN-61000-4-5: Surge Signal Ports (1-kV indoor, 2-kV outdoor)

●  IEC/EN-61000-4-5: Surge DC Port 1-kV

●  IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10Vrms)

●  IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30 A/m)

●  IEC/EN-61000-4-11: Voltage Dips, Short Interruptions, and Voltage Variations

Network Equipment Building Standards

The module meets the following NEBS:

●  GR-1089-CORE

●  GR-63-CORE

ETSI and EN Standards

●  EN300 386: Telecommunications Network Equipment (EMC), OTC

●  EN55022: Information Technology Equipment (Emissions)

●  EN55024: Information Technology Equipment (Immunity)

●  EN50082-1/EN-61000-6-1: 1995-Generic Immunity Standard

●  Operating temperature, nominal: 41 to 104°F (5 to 40°C)

●  Operating temperature, short-term: 23 to 131°F (-5 to 55°C)

●  Storage relative humidity: 5 to 95% RH

●  Operating humidity, nominal: 5 to 85% RH

●  Operating humidity, short-term: 5 to 90% RH

●  Operating altitude: -60 to 4000m (up to 2000m conforms to IEC/EN/UL/CSA 60950 requirements)