A9K-2X100GE-SE Specification
A9K-2X100GE-SE Specification |
|
| Part Number | A9K-2X100GE-SE |
| Product Description | Cisco ASR 9000 2-Port 100GE Service Edge Optimized Line Card, Requires CFP optics |
| Chassis compatibility | Compatible with the Cisco ASR 9000 Series 22-slot, 10-slot, and 6-slot chassis |
| Port density | 2 ports of 100 Gigabit Ethernet per line card |
| Ethernet | b 100-Gbps IEEE 802.3ba compliant
b 100 Gigabit Ethernet PHY monitoring b IEEE 802.x flow control b Full-duplex operation b Per-port byte and packet counters for policy drops; oversubscription drops; cyclic redundancy check b (CRC) error drops; packet sizes; and unicast, multicast, and broadcast packets |
| Performance | b 100-Gbps line-rate throughput per port |
| Options | Each line card is available as either a Service Edge Optimized (enhanced QoS) or Packet Transport Optimized (basic QoS) line card |
| Reliability and availability | Line card online insertion and removal (OIR) support without affecting the system |
| Physical dimensions (H x W x D); weight | 14 x 1.72 x 20.5 in.; 14 lb (35.56 x 4.37 x 52.07 cm; 6.35 kg) |
| Network Equipment Building Standards (NEBS) | Cisco ASR 9000 Series Routers are designed to meet:
b SR-3580: NEBS Criteria Levels (Level 3) b GR-1089-CORE: NEBS EMC and Safety b GR-63-CORE: NEBS Physical Protection |
| Operating temperature (nominal) | 41 to 104B:F (5 to 40B:C) |
| Operating temperature (short-term) | 23 to 131B:F (-5 to 55B:C)
Note: Short-term refers to a period of not more than 96 consecutive hours and a total of not more than 15 days in 1 year (total of 360 hours in any given year, but no more than 15 occurrences during that 1-year period). |
| Operating humidity (nominal) (relative humidity) | 10 to 85% |
| Storage temperature | -40 to 158B:F (-40 to 70B:C) |
| Storage (relative humidity) | 5 to 95%
Note: Not to exceed 0.024 kg of water per kg of dry air |
| Operating altitude | -60 to 4000m (up to 2000m conforms to IEC, EN, UL, and CSA 60950 requirements) |
| ETSI standards | Cisco ASR 9000 Series Routers are designed to meet:
b EN300 386: Telecommunications Network Equipment (EMC) b ETSI 300 019 Storage Class 1.1 b ETSI 300 019 Transportation Class 2.3 b ETSI 300 019 Stationary Use Class 3.1 b EN55022: Information Technology Equipment (Emissions) b EN55024: Information Technology Equipment (Immunity) b EN50082-1/EN-61000-6-1: Generic Immunity Standard |
| EMC standards | Cisco ASR 9000 Series Routers are designed to meet:
b FCC Class A b ICES 003 Class A b AS/NZS 3548 Class A b CISPR 22 (EN55022) Class A b VCCI Class A b BSMI Class A b IEC/EN 61000-3-2: Power Line Harmonics b IEC/EN 61000-3-3: Voltage Fluctuations and Flicker |
| Immunity | Cisco ASR 9000 Series Routers are designed to meet:
b IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8kV Contact, 15kV Air) b IEC/EN-61000-4-3: Radiated Immunity (10V/m) b IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2kV Power, 1kV Signal) b IEC/EN-61000-4-5: Surge AC Port (4kV CM, 2kV DM) b IEC/EN-61000-4-5: Signal Ports (1kV) b IEC/EN-61000-4-5: Surge DC Port (1kV) b IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10Vrms) b IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30A/m) b IEC/EN-61000-4-11: Voltage DIPS, Short Interruptions, and Voltage Variations |
| Safety | Cisco ASR 9000 Series Routers are designed to meet:
b UL/CSA/IEC/EN 60950-1 b IEC/EN 60825 Laser Safety b ACA TS001 b AS/NZS 60950 b FDA – Code of Federal Regulations Laser Safety |
