ASR-9010-DC-V2 specifications |
|
Description | Cisco ASR 9010 System ASR-9010-DC-V2 ASR 9010 DC Chassis with PEM Version 2 |
Cisco ASR 9010 Specs |
|
Physical specifications | Height: 36.75 in. (933.45 mm) (21 RU)
Width: 17.38 in. (441.45 mm) Depth: b With doors: 29.03 in. (737.4 mm) b Without doors: 28.24 in. (717.3 mm) Weight: b 155.6 lb (70.73 kg) (chassis with PEM) 231.6 lb (105.27 kg) (fully loaded, excluding linecards and power modules) b RSP, two v2 fan trays, PEMs |
Slot orientation | Vertical |
Cisco ASR 9000 Series RSP | Dual redundant RSPs with integrated fabric in 2 slots |
Cisco ASR 9000 Series line cards | 8 line-card slots |
bCommonsb components | 2 RSPs
2 fan trays 2 PEMs (either DC or AC) 1 fan filter |
Reliability and availability | Fabric redundancy
Fan redundancy Feed redundancy Power-supply redundancy RSP redundancy Software redundancy |
Rack mounting | 19-in. default
21- and 23-in. adapters available Note: Minimum 17.75-in. opening between posts is needed for proper operation |
Cabinet mounting | Yes
Note: Doors not recommended in enclosed cabinets |
Wall mounting | No |
Airflow | Front-to-back |
Performance |
|
Fabric | One per RSP:
b Active/active nonblocking operation mode in dual-RSP redundant configuration b Fully redundant in dual-RSP redundant configuration b Built-in service-intelligence and traffic-prioritization capability |
Thermal | Two fan trays:
b 12 high-efficiency fans per tray b Variable-speed fans for optimal thermal performance b No single point of failure |
Modularity | Pay-as-you-grow power for future scalability, available in AC and DC.
Multiple power module types: b 6 kW and 3 kW AC power modules b 4.4 kW and 2.1 kW DC power modules Note: Mixing of AC and DC modules is not supported |
Redundancy | b AC: N+N redundancy
b DC: N+1 redundancy b Power module redundancy b A/B Feed redundancy b PEM redundancy |
Power zones | No power zone restrictions
Fully load-sharing power infrastructure |
Power input | Worldwide ranging AC (200-240V; 50-60 Hz; 16A maximum)
Worldwide ranging DC (-40 to -72V; 50A nominal, 60A maximum) |
Power-module airflow | Front-to-back |
Environmental Specifications |
|
Operating temperature (nominal) | 41 to 104B:F (5 to 40B:C) |
Operating temperature (short-term) | ASR 9006: 23 to 131B:F (-5 to 55B:C)
ASR 9010: 23 to 122B:F (-5 to 50B:C) |
Operating humidity (nominal) (relative humidity) | 5 to 90% |
Storage temperature | -40 to 158B:F (-40 to 70B:C) |
Storage (relative humidity) | 5 to 93% |
Operating altitude | -60 to 4000m (up to 2000m conforms to IEC/EN/UL/CSA 60950 requirements) |
Regulatory Compliance |
|
Network Equipment Building Standards (NEBS) | Cisco ASR 9010 Routers are designed to meet:
b SR-3580: NEBS Criteria Levels (Level 3) b GR-1089-CORE: NEBS EMC and Safety b GR-63-CORE: NEBS Physical Protection b VZ.TPR.9205: Verizon TEEER |
ETSI standards | Cisco ASR 9010 Routers are designed to meet:
b EN300 386: Telecommunications Network Equipment (EMC) b ETSI 300 019 Storage Class 1.1 b ETSI 300 019 Transportation Class 2.3 b ETSI 300 019 Stationary Use Class 3.1 |
EMC standards emission | Cisco ASR 9010 Routers are designed to meet:
b FCC Class 47CFR15 A b ICES 003 Class A b AS/NZS CISRP22 Class A b CISPR 22 (EN55022) Class A b VCCI Class A b BSMI Class A b IEC/EN 61000-3-12: Power Line Harmonics b IEC/EN 61000-3-11: Voltage Fluctuations and Flicker b EN55022: Information Technology Equipment (Emissions) b EN 50121-4: Railway EMC |
EMC standards immunity | Cisco ASR 9010 Routers are designed to meet:
b IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8kV Contact, 15kV Air) b IEC/EN-61000-4-3: Radiated Immunity (10V/m) b IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2kV Power, 1kV Signal) b IEC/EN-61000-4-5: Surge AC Port (4kV CM, 2kV DM) b IEC/EN-61000-4-5: Signal Surge Ports (1kV) b IEC/EN-61000-4-5: Surge DC Port (1kV CM, 1kV DM) b IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10Vrms) b IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30A/m) b IEC/EN-61000-4-11: Voltage DIPS, Short Interruptions, and Voltage Variations b EN55024: Information Technology Equipment (Immunity) b EN50082-1/EN-61000-6-1: Generic Immunity Standard b EN 50121-4: Railway EMC |
Safety | Cisco ASR 9010 Routers are designed to meet:
b UL/CSA/IEC/EN 60950-1 b IEC/EN 60825 Laser Safety b ACA TS001 b AS/NZS 60950 b FDA Code of Federal Regulations Laser Safety |
Cisco Router ASR 9000
Cisco ASR 9010 System ASR-9010-DC-V2 ASR 9010 DC Chassis with PEM Version 2
Model: | ASR-9010-DC-V2 Cisco Router ASR 9010 |
Detail: | Cisco ASR 9010 System ASR-9010-DC-V2 ASR 9010 DC Chassis with PEM Version 2 |
Brand: | CISCO |
Condition: | Brand New Sealed |
Availability: | IN STOCK |
$28.00
InquiryComparebrands | Cisco |
---|