Cisco IE-3010-16S-8PC – 3000 Series

IE-3010-16S-8PC Specification

• Forwarding rate based on 64-byte packets: 6.5 Mpps

• 256 MB DDR2 SDRAM

• 1 GB SD Flash memory (128 MB enabled)

• Layer 2 LAN Base image supports 255 Vlans, 2000 MAC addresses, 256 IGMP groups.

• Layer 3 IP Services image supports 1000 Vlans, 3000 MAC addresses, 1000 IGMP groups, 3000 unicast routes

• Configurable maximum transmission unit (MTU) of up to 9000 bytes, with a maximum Ethernet frame size of 9018 bytes (jumbo frames) for bridging on Gigabit Ethernet ports, and up to 1998 bytes for bridging on both Fast Ethernet ports

• 10/100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 unshielded twisted pair (UTP) or shielded twisted pair (STP) cabling

• 100FX SFP ports (IE-3010-16S-8PC only):

• 100BASE-FX, -LX, -ZX, and -BX10: Duplex LC receptacle fiber connectors (multimode and single mode)

Gigabit ports:

• 10/100/1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP/STP cabling

• 1000BASE-SX, -LX/LH, -ZX, and -BX10: Duplex LC receptacle fiber connectors (multimode and single-mode fiber)

Console ports:

• Management console port: RJ45 connector for serial connection

• Management console port: USB mini type B connector for USB connection

• System-status LED: System activity, system integrity,

• Alarm-in status LEDs: Four alarm inputs status indicator

• Alarm-out status LED: Alarm status indicator

• Power supply unit LED: Power output integrity and power supply presence

• PoE (IE-3010-16S-8PC only): PoE activity, PoE integrity, and PoE disabled

• SD Flash LED: SD flash integrity and SD flash presence

• RS232 LED: RS232 console selection

• USB LED: USB console selection

• -40 ºF to 185ºF (-40 to +85ºC) type test for 16 hours at 85ºC

• Operating altitude: 3000 m (9843 ft) at 40ºC (104ºF)

• Operating relative humidity: 5% to 95% noncondensing

• Altitude: 15,000 ft (4570 m)

• Relative humidity: 5% to 95% noncondensing

• Cisco IE-3010-16S-8PC: 230,112 hrs