E7W01A Specification
MSA 1040 Specification |
|
| Capacity Single Enclosure and Maximum Additional Drive Enclosures | LFF: 120 TB (single LFF array-head -using 12 x 10TB LFF SAS MDL drives) 480 TB (by adding 3 LFF Disk Enclosures behind LFF Array & using 10 TB LFF SAS MDL drives)
SFF: 43.2 TB (single SFF array-head – using 24 x 1.8TB SFF SAS drives) 178.2 TB (by adding 3 SFF Disk Enclosures behind SFF Array & using 1.8TB SFF SAS drives) NOTE: 1) maximum available storage capacity depends on the RAID level being implemented |
| Pool Capacity | GL200: 169 TB (154 TiB)
GL210: 219 TB (200 TiB) GL220: 329 TB (300 TiB) GL220 with Large Pool Support: 562 TB (512 TiB) NOTE: 1) The above pool capacities by firmware release apply to virtual storage only 2) The above capacities are usable capacity/pool. Each MSA system can support two pools. Therefore each MSA storage system can have double the usable capacity listed above |
| Cache | 6 GB per controller
NOTE: 6GB cache includes Data (Read/Write) cache = 4GB and Metadata and System OS cache = 2GB |
| Total LUNs (LUN size are dependent of the storage architecture: Linear vs. Virtualized) | size: 140TB (128TiB) Thin Provisioning allows you to create the LUNs independent of the physical storage |
| Host Interconnect | 2 x 8Gb Fibre Channel ports per controller
2 x 1GbE RJ-45 ports per controller 2 x 10GbE ports per controller 2x 12Gb SAS ports per controller |
| Maximum Drives w/ 3 expansion | 48 LFF/99 SFF |
| Maximum Host Supported | 64 in v2 UI
512 in v3 UI |
| Standard Software | Snapshots (64) |
| Optional Software | Remote Snap (linear storage only) Max Snapshot (512) |
