FPR-CH-9300-AC-RF Specification |
||||
Dimensions (H x W x D) |
5.25 x 17.5 x 32 in. (13.3 x 44.5 x 81.3 cm) |
|||
Form factor |
3 Rack Units (3RU), fits standard 19-in. (48.3-cm) square-hole rack |
|||
Security module slots |
3 |
|||
Network module slots |
2 (within supervisor) |
|||
Supervisor |
Cisco Firepower 9000 Supervisor with 8 x 10 Gigabit Ethernet ports and 2 network module slots for I/O expansion |
|||
Security modules |
● Cisco Firepower 9000 Security Module 24 with 2 x SSDs in RAID-1 configuration
● Cisco Firepower 9000 Security Module 36 with 2 x SSDs in RAID-1 configuration |
|||
Network modules |
● 8 x 10 Gigabit Ethernet Enhanced Small Form-Factor Pluggable (SFP+) network modules
● 4 x 40 Gigabit Ethernet Quad SFP+ network modules ● 2 x 100 Gigabit Ethernet Quad SFP28 network modules (double-wide, occupies both network module bays) Note: Firepower 9300 may also be deployed as a dedicated threat sensor, with fail-to-wire network modules. Please contact your Cisco representative for details. |
|||
Maximum number of interfaces |
Up to 24 x 10 Gigabit Ethernet (SFP+) interfaces; up to 8 x 40 Gigabit Ethernet (QSFP+) interfaces with 2 network modules |
|||
Integrated network management ports |
1 x Gigabit Ethernet copper port (on supervisor) |
|||
Serial port |
1 x RJ-45 console |
|||
USB |
1 x USB 2.0 |
|||
Storage |
Up to 2.4 TB per chassis (800 GB per security module in RAID-1 configuration) |
|||
Power supplies |
|
AC power supply |
-48V DC power supply |
HVDC power supply |
Input voltage |
200 to 240V AC |
-40V to -60V DC* |
240 to 380V DC |
|
Maximum input current |
15.5A to 12.9A |
69A to 42A |
<14A at 200V |
|
Maximum output power |
2500W |
2500W |
2500W |
|
Frequency |
50 to 60 Hz |
– |
– |
|
Efficiency (at 50% load) |
92% |
92% |
92% (at 50% load) |
|
Redundancy |
1+1 |
|||
Fans |
4 hot-swappable fans |
|||
Noise |
75.5 dBA at maximum fan speed |
|||
Rack mountable |
Yes, mount rails included (4-post EIA-310-D rack) |
|||
Weight |
105 lb (47.7 kg) with one security module; 135 lb (61.2 kg) fully configured |
|||
Temperature: standard operating |
Up to 10,000 ft (3000 M): 32 to 104°F (0 to 40°C) for SM-24 module 32 to 88°F (0 to 35°C) for SM-36 module at sea-level Altitude adjustment notes: For SM-36, maximum temp is 35⁰C, for every 1000 feet above sea level subtract 1⁰C |
|||
Temperature: NEBS operating |
Long term: 0 to 45°C, up to 6,000 ft (1829 m) Long term: 0 to 35°C, 6,000 to 13,000 ft (1829-3964 m) Short term: -5 to 55°C, up to 6,000 ft (1829 m) Note: Cisco Firepower 9300 NEBS compliance applies only to SM-24 configurations. |
|||
Temperature: nonoperating |
-40 to 149°F (-40 to 65°C); maximum altitude is 40,000 ft |
|||
Humidity: operating |
5 to 95% noncondensing |
|||
Humidity: nonoperating |
5 to 95% noncondensing |
|||
Altitude: operating |
SM-24: 0 to 13,000 ft (3962 m) SM-36: 0 to 10,000 ft (3048 m); please see above Operating Temperature section for temperature adjustment notes |
|||
Altitude: nonoperating |
40,000 ft (12,192 m) |
* Minimum turn-on voltage is -44V DC
There are no reviews yet.