NPE-G2 (USED) (USED) Specification
|
7200VXR NPE-G2 Datasheet |
|
|
Manufacturer |
Cisco |
|
Manufacturer Part # |
7200VXR NPE-G2 |
|
Device Type |
Router – with Cisco 7200 Series Network Processing Engine NPE-G2 |
|
Enclosure Type |
Rack – mountable b Modular |
|
General |
|
|
Installed Modules Qty (Max) |
1 (installed) / 8 (max) |
|
Approximate Width |
16.8 in |
|
Approximate Depth |
17.0 in |
|
Approximate Height |
5.2 in |
|
Processor / Memory / Storage |
|
|
RAM Installed ( Max ) |
1 GB (installed) / 2 GB (max) – DDR SDRAM |
|
Flash Memory |
256 MB |
|
Networking |
|
|
Connectivity Technology |
Wired |
|
Data Link Protocol |
Ethernet, Fast Etherneto< Gigabit Ethernet |
|
Data Transfer Rate |
1 Gbps |
|
Remote Management Protocol |
Telnet, HTTP, SNMP |
|
Features |
Layer 2 switching, IPv6 support, Full duples capability, VLAN support, APR support, Manageable, BOOTP support, MPLS support, Modular design, DHCP support, Flow control, VPN support, Auto-sensing per device |
|
Expansion Slot(s) |
7 (total) / 6 (free) x Expansion slots, 1 (total) / 0 (free) x Memory, |
|
Network / Transport Protocol |
UDP/IP, TCP/IPo< PPPoA |
|
Routing Protocol |
BGP, EIGRP, RIP, IS-IS, HSRP, IGRP, OSPF |
|
Expansion / Connectivity |
|
|
Interfaces |
3 x Ethernet 10Base – T/100Base – TX/1000Base b T b RJ – 45, |
|
Miscellaneous |
|
|
Compliant Standards |
AS/NZ 3548 Class A, CSA 22.2 No. 950, FCC Class A certified, EN 60950, CSA, NEBS level 3, IEC 61000-4-11, IEC 61000-4-3, IEC 61000-4-2, IEC 61000-3-2, IEC950, IEC 61000-4-5, IEC 61000-4-4, IEC 61000-4-6, UL 1950, VCCI-II, EN55022 Class B |
|
Authentication Method |
CHAP, PAP, TACACS, Secure Shell (SSH), RADIUS |
|
Power |
|
|
Power Device |
Power supply – redundant – 280 Watt |
|
Voltage Required |
AC 120/230 V |
|
Power Provided |
280 Watt |
|
Environmental Parameters |
|
|
Min Operating Temperature |
41 B0F |
|
Max Operating Temperature |
104 B0F |
|
Humidity Range Operating |
5 – 85% |
