Juniper QFX Series QFX5100-48T – switch – 48 ports – managed – rack-mountable


Model: QFX5100-48T-AFI – Juniper QFX5100 Series Switches
Detail: QFX5100. 48X10GT+6X40G. 2 AC. BF
Condition: Brand New Sealed
Availability: IN STOCK



Enquiry Now
Compliant Standards NEBS level 3, EN55022 Class A, FCC CFR47 Part 15, UL 60950-1, IEC 60950-1, EN 60950-1, WEEE, RoHS, BSMI CNS 13438, REACH, EN 60825-1, GR-1089-CORE, VCCI Class A, GR-63-CORE, NCC, China RoHS, AS/NZS CISPR 22, CAN/CSA-C22.2 No. 60950-1
Dimensions & Weight
Width 17.4 in
Depth 21.5 in
Height 1.7 in
Weight 24.69 lbs
Environmental Parameters
Min Operating Temperature 32 ?F
Max Operating Temperature 104 ?F
Humidity Range Operating 5 – 90% (non-condensing)
Min Storage Temperature -40 ?F
Max Storage Temperature 158 ?F
Humidity Range Storage 0 – 95% (non-condensing)
Device Type Switch – 48 ports – L3 – managed
Enclosure Type Back to front airflow rack-mountable 1U
Subtype 10 Gigabit Ethernet
Ports 48 x 100/1000/10000 + 6 x 40 Gigabit QSFP+ (breakout compatible)
Performance Switching capacity: 1.44 Tbps ? Switching capacity: 1.08 Bpps
Capacity IPv4 routes (Unicast): 128000 ? Virtual interfaces (VLANs): 4091 ? IPv4 hosts: 208000 ? IPv4 routes (Multicast): 104000 ? IPv6 routes (Multicast): 52000 ? IPv6 routes (Unicast): 64000 ? ARP entries: 48000 ? Multiple Spanning Tree Protocol instances: 64 ? VLAN Spanning Tree Protocol instances: 253
MAC Address Table Size 288K entries
Jumbo Frame Support 9216 bytes
Fibre Channel FC-BB-5, FC-BB-6
Routing Protocol OSPF, RIP, RIP-2, IGMPv2, IGMP, VRRP, PIM-SM, static IP routing, IGMPv3, MSDP, ECMP, Bidirectional Forwarding Detection (BFD), CIDR
Remote Management Protocol SNMP 1, SNMP 2, RMON, Telnet, SNMP 3, SSH, CLI
Encryption Algorithm MD5, AES
Authentication Method Secure Shell (SSH), RADIUS, TACACS+, Secure Shell v.2 (SSH2)
Features Flow control, VPN support, BOOTP support, RARP support, ARP support, trunking, VLAN support, IGMP snooping, DoS attack prevention, store and forward, MAC address filtering, IPv6 support, High Availability, SNTP support, Low-latency queuing (LLQ), Weighted Random Early Detection (WRED), sFlow, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, tunneling, Data Center Bridging Exchange (DCBX) support, DHCP snooping, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), DHCP server, Dynamic ARP Inspection (DAI), Redundant trunk group (RTG), Non-Stop Bridging (NSB), Non-Stop Routing (NSR), Graceful Route Engine Switchover (GRES), IPv4 support, DHCP relay, Data Center Bridging (DCB), Management Information Base (MIB), Strict Priority Queuing (SPQ), VLAN Spanning Tree Protocol (VSTP), loop prevention, redundant hot swappable fans, FCoE forwarding, Class of Service (CoS), cut-through, 12 MB shared buffer
Compliant Standards IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1s, IEEE 802.1ad, IEEE 802.1ab (LLDP), IEEE 802.1Qbb, IEEE 802.1Qaz, IEEE 802.1Qau, IEEE 802.1Qbg, Shaped Deficit Weighted Round-Robin (SDWRR)
Processor 1 x Intel: 1.5 GHz
Built-in Devices 32 GB SSD
Expansion / Connectivity
Interfaces 48 x 10GBase-T RJ-45 ? 6 x QSFP+ (breakout compatible) ? 1 x console management ? 1 x USB management ? 1 x RJ-45 management ? 1 x SFP management
Power Device Internal power supply – hot-plug
Installed Qty 2 (installed) / 2 (max)
Power Redundancy Yes
Power Redundancy Scheme 1+1
Voltage Required AC 120/230 V
Power Consumption Operational 335 Watt
80 PLUS Certification 80 PLUS
Software / System Requirements
OS Required JUNOS
SKU: QFX5100-48T-AFI Categories: ,


Based on 0 reviews

0.0 overall

Be the first to review “Juniper QFX Series QFX5100-48T – switch – 48 ports – managed – rack-mountable”

There are no reviews yet.